Wednesday, 8 February 2017


What is a stored procedure?
As we have seen in the introduction to PL/SQL that there are two types of PL/SQL blocks – anonymous and stored procedures.

A stored procedure is a PL/SQL block that is stored in the database with a name. It is invoked using the name. Each procedure is meant for a specific purpose.

A stored procedure is stored in the database as an object. It is also called as database procedure as it is stored in the database.

A procedure may take one or more parameters. If a procedure takes parameters then these parameters are to be supplied at the time of calling the procedure.

What is a function?
A function is similar to procedure, except that it returns a value.  The calling program should use the value returned by the function.
Advantages of stored procedures
Stored procedures and functions offer the following benefits.

Reduced network traffic
Stored procedures are stored in the database on the server. In order to invoke a stored procedure a client has to use only the name of the stored procedure. This results in reduced network traffic because only the name is passed to server and not the entire PL/SQL block.

Better Performance
Stored procedures improve performance because the database accessed by stored procedures and stored procedures themselves are stored in the database.  Furthermore, because a stored procedure’s compiled form is available in the database, no compilation step is required to execute the code.

Apart from this, stored procedures make use of   shared memory. That means if a stored procedure is called by user-1, then it is brought into server’s memory. As a result there is a chance of finding the stored procedure in memory, when user-2 later wants to use the same procedure. In this case stored procedure need not be brought into memory since it is already in the memory.  This saves time and increases performance.

Easy Maintenance
If there is any change in the application, only the concerned stored procedures are to be modified to incorporate the change. As all the clients access stored procedures, they automatically use the modified definition. You only have to change business login once in the stored procedure. Therefore stored procedures improve the integrity and consistency of your applications.

Stored procedures help enforcement of data security.  You can allow users to access only the stored procedures and not the table that are manipulated by stored procedures.

Whenever a stored procedure runs, it runs with the privileges of the owner and not the user running it.  Because users only have the privilege to execute the procedure and not the privileges to access the underlying tables, it increases security.

Owner rights
When a stored procedure is run under the privileges of the owner of the stored procedure, it is called as owner rights.

Invoker rights
When a stored procedure is executed with the privileges of the invoker and not under the privileges of the owner, it is called as invoker rights.

We will discuss about the difference between these two ways of running a stored procedure in detailed later in this chapter.

Creating a stored procedures
A stored procedure is created using CREATE PROCEDURE command.
CREATE [OR REPLACE] PROCEDURE name [(parameter[,parameter, ...])] {IS |AS}
[local declarations]
       executable statements
       exception handlers]
END [name];

OR REPLACE   is used to create a procedure even a procedure with the same name is already existing.

Oracle creates procedure even though the procedure is not valid but it displays the message saying that the procedure is created with errors.  Then you have to rectify the errors and recreate the procedure. If OR REPLACE option is not given Oracle doesn’t allow you to replace an existing stored procedure. So, it is better you use OR REPLACE option so that the existing invalid version of the procedure will be replaced with the valid version.
During the creation of the procedure if there are any errors Oracle displays the message saying procedure is created but with errors with the following message:

Warning: Procedure created with compilation errors.

In order to displays errors in the most recent CREATE PROCEDURE statement, use SHOW ERRORS command.      

The following stored procedure inserts a new record into PAYMENTS table with the given roll number and amount.

create or replace procedure  newpayment(rollno number, amt number)
   insert into payments values(rollno, sysdate,amt);

Once a stored procedure is stored in the database, it can be invoked using EXECUTE command by using the name of the procedure. 

EXECUTE command
A procedure can be executed using EXECUTE command. To execute a procedure either you must be the owner of the procedure or you must have EXECUTE privilege on the procedure.

The following example shows how to invoke NEWPAYMENT procedure.

SQL> execute newpayment(10,2000);

PL/SQL procedure successfully completed.

In the above example, NEWPAYMENT is invoked by passing 10 and 2000. It inserts a new row into PAYMENTS table with values 10, sysdate, and 2000.

Creating a stored function
A stored function is same as a procedure, except that it returns a value. CREATE FUNCTION command is used to create a stored function.

               [(parameter[,parameter, ...])]
               RETURN  datatype
{IS | AS}
[local declarations]
          executable statements

          RETURN value;
          exception handlers]
END [name];

OR REPLACE is used to create a function even though a function with the same name already exists

RETURN datatype specifies the type of data to be returned by the function.

RETURN statement in the executable part returns the value. The value must be of the same type as the return type specified using RETURN option in the header.

The following stored function takes roll number of the student and return the amount yet to be paid by the student.

create or replace function  getdueamt(prollno number)
return number
 v_fee     number(5);
 v_amtpaid number(5);
   -- get total amount paid by student
   select sum(amount) into  v_amtpaid
   from  payments
   where  rollno = prollno;
   -- get course fee of the course into which student joined
   select fee into v_fee
   from courses
   where ccode = ( select ccode from batches
                   where bcode in
                    ( select bcode from students
                      where  rollno = prollno)
   -- return the difference
   return  v_fee - v_amtpaid;

The above function can be called from a PL/SQL block as follows:


User-defined  PL/SQL  functions can be used in SQL in the same manner as the standard functions such as  ROUND and  SUBSTR..

For example, the function GETDUEAMT can be invoked from SELECT command as follows:

SQL> select rollno, getdueamt(rollno)
  2  from students;

--------- -----------------
        1                 0
        2                 0
        3                 0
        4                 0
        5                 0
        6                 0
        7                 0
        8                 0
        9              1500
       10              2000
       11                 0
       12              1500
       13                 0

 Getting source code

It is possible to see the source code of stored procedures and function by using USER_SOURCE data dictionary view.

The following SELECT command will display the source code of NEWPAYMENT stored procedure.

SQL> select text
  2  from user_source
  3  where  name = 'NEWPAYMENT';

procedure  newpayment(rollno number, amt number)
   insert into payments values(rollno, sysdate,amt);
Privileges required
To create a stored procedure, you must have CREATE PROCEDURE system privilege.

You must also have required object privileges on the objects that are referred in the procedure in order to successfully compile the procedure.

Note: The owner of the procedure CANNOT obtain required privileges on the stored procedure through ROLES.

Stored procedures and functions are compiled at the time of creation and stored in the compiled form.  If a procedure becomes invalid afterwards, it is to be recompiled before it is executed. Oracle implicitly compiles the procedure when an invalid procedure is referred.  However, it is possible to explicitly recompile

In order to recompile a stored procedure use ALTER PROCEDURE and ALTER FUNCTION to recompile a procedure and function respectively.

ALTER FUNCTION  functionname    COMPILE;

The following sequence will illustrate the importance of recompilation.

*  Assume user SCOTT has created NEWPAYMENT procedure as follows

create or replace procedure  newpayment(rollno number, amt number)
   insert into book.payments values(rollno, sysdate,amt);

*  Since SCOTT doesn’t have INSERT privilege on PAYMENTS table of BOOK, the procedure is created but marked as invalid. You can see the status of the procedure using the following command.

select status from user_objects where object_name = 'NEWPAYMENT';


*  Now, user BOOK has granted INSERT privilege on PAYMENTS table to SCOTT as follows:


*  Then any subsequent reference to NEAPAYMENT procedure in SCOTT will implicitly recompile the procedure. But in order to avoid extra time taken to recompile the procedure at runtime, it can be recompiled using ALTER PROCEDURE command as follows:
*  After recompilation, the procedure will have status VALID as provide by the following query.

select status from user_objects where object_name = 'NEWPAYMENT';


 Types of Parameters
Parameters of a procedure are of two types.

*  Formal parameters
*  Actual Parameters

Formal Parameters
The parameters declared in the definition of procedure are called as formal parameters. They receive the values sent while calling the procedure.

procedure  increase_fee (pccode varchar2,  pamt number)

In the above procedure, PCCODE, PAMT parameters are called as formal parameters.

Actual Parameters
The values given within parentheses while calling the procedure are called as actual parameters.

increase_feepaid ( v_ccode, 2000);

v_ccode and  2000 are actual parameters.  These values are copied to the corresponding formal parameters - pccode and pamt.

Parameter Modes
Parameter mode is used to specify what can be done with formal parameter. The following are the available modes.

*  IN
*  OUT

IN mode
IN parameters lets you pass a value to the subprogram being called. The value cannot be changed inside the subprogram. It is like a constant in the subprogram. Therefore it cannot be assigned a value.

procedure increase_fee (pccode in varchar2, pamt number) is
     . . .

The actual parameter corresponding to IN parameter can be a variable, constant, or expression.

The default parameter mode is IN. In the above example though we didn’t specify the parameter mode for PAMT is it taken as IN parameter.

OUT Mode
An OUT parameter lets the subprogram pass a value to caller. Inside the subprogram OUT parameter is an uninitialized variable.

Subprogram has to place a value in the OUT parameters, which will be used by caller program. Whatever changes are made to formal parameter, the changes will be made available to actual parameter.

The actual parameter corresponding to OUT parameter must be a variable.

It is same as IN and OUT modes put together.  It can get a value from the calling program and return value to calling program. The value of this type of parameter can be used in the subprogram and

The actual parameter corresponding to IN OUT parameter must be a variable.

The following procedure takes course code and returns the dates on which the first and last batches of that course have started.

create or replace procedure get_dates( pccode in  varchar2,
                                       first_date  out  date,
                                       last_date out  date)  is

         select  min(stdate)  into  first_date
         from   batches
         where  ccode = pccode;

         select  max(stdate)  into  last_date
         from   batches
         where  ccode = pccode;


Once the procedure is created, it can be called as follows:

     min_date date;
     max_date date;

   get_dates( ‘ora’,  min_date, max_date);
   dbms_output.put_line( min_date ||  ‘:’ || max_date);

The output of the above program will be:

NOCOPY Compiler Hint
By default, OUT and IN OUT parameters are passed by value. That means, the value of an IN OUT actual parameter is copied into the corresponding formal parameter. Then, if the procedure exits normally, the values assigned to OUT and IN OUT formal parameters are copied into the corresponding actual parameters.

When the parameters hold large data structures such as records, and instances of object types (which we will in later chapters), copying slows down execution and uses up more memory. To prevent that, you can specify the NOCOPY hint, which allows the PL/SQL to pass OUT and IN OUT parameters by reference.

PROCEDURE change(pstudent IN OUT NOCOPY student_type) IS ...

In the above example parameter PSTUDENT is of object type – STUDENT_TYPE. It is now passed by reference as we used NOCOPY option with it.
Invoker Rights vs. definer rights
By default, when a user executes a procedure, the procedure is executed with the privileges of the owner. That means, the privileges of invoking user (invoker) are not taken into account only the privileges of definer (owner) of the procedure will be considered.

If the procedure is to be called by user other than the owner then the use must be granted EXECUTE privilege on the procedure.

When the procedure is executed using the privileges of definer then, it is called as definer rights.

Definer rights is the default option.  All object references in the procedure will be referring to objects of definer and not invoker. Let us see an example to understand this point further.

Assume we have procedure ADDMESSAGE created by user SRIKANTH as follows:

create or replace procedure addmessage(msg varchar2)
      insert into messages values (msg, sysdate);

Then user SRIKANTH has granted EXECUTE privilege to user PRANEETH as follows:

grant execute on addmessage to praneeth;

Now user PRANEETH can execute the procedure as follows:

execute  Srikanth.addmessage('First message');

The message “First message” is inserted into MESSAGES table of SRIKANTH – the definer of the procedure.

What if user PRANEETH also has MESSAGE table with the same structure as MESSAGES table of SRIKANTH? The answer is; even now the message goes to MESSAGES table of SRIKANTH, since all references to objects in the procedure are resolved to definer of the procedure.

Invoke Rights
Oracle8i has introduced invoker rights. In case of invoker rights, procedure is executed with the privileges of invoker and not the definer of the procedure.

If you want the procedure to be executed with invoker rights and not with definer right, then the procedure is to be created with AUTHID CURRENT_USER option as follows.

create or replace procedure addmessage(msg varchar2)
authid current_user as
      insert into messages values (msg, sysdate);
AUTHID CURRENT_USER option specifies that the procedure to be executed under the privileges of invoking user.  Also remember that all object references are resolved to invoker and not the definer. However, if any object is qualified with schema (username) then it will refer to object in that schema. In other words, all unqualified object are taken from invoker’s schema.

Now if you execute ADDMESSAGE procedure from user PRANEETH, it will fail, as there is no MESSAGES table in that schema.

SQL> execute srikanth.addmessage('Second message');
BEGIN srikanth.addmessage('fine'); END;

ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SRIKANTH.ADDMESSAGE", line 4
ORA-06512: at line 1

As you can understand, the above message is complaining about missing MESSAGES table. If you create MESSAGES table in PRANEETH schema, then the procedure will succeed and the message is inserted into MESSAGES table of PRANEETH account.

The advantage of invoker rights is that it allows you to centralized code whereas the data is stored in individual schema. That means though users use the same common code the data is stored in objects of their schema.

This procedure is used to create your own application error numbers and messages.

When you have to terminate a PL/SQL program, you can display an error message and send error code to host environment using this procedure.

RAISE_APPLICATION_ERROR (errornumber,  errormessage);
errornumber     is a number in the range -20001  and  -20999.

errormessage   is  the message to be displayed.

The following PL/SQL block displays the error message along with error number (-20100) when NO_DATA_FOUND exception is raised.

    v_fee courses.fee%type;

    select fee into v_fee
    from   courses
    where  ccode =  ‘ora’;

    -- remaining statements
    when  no_data_found then
        raise_application_error(-20100,‘Invalid course code’);

A package is a collection of related procedures, functions, variables and data types.  A package typically contains two parts – specification and body.

Package specification contains declarations for items, procedure and functions that are to be made public.  All public objects of package are visible outside the package. In other words, public objects are callable from outside of the package.

Private items of the package can be used only in the package and not outside the package.

The following is the syntax to create package specification.

CREATE PACKAGE package_name AS
   /* declare  public objects  of package */


Body of the package defines all the objects of the package.  It includes public objects that are declared in package specification and objects that are to be used only within the package – private members.

     /* define objects of package */
*  procedures declared in the package specification
*  functions declared in the package specification
*  definition of cursors declared in the package specification
*  local procedures and functions, not declared in the package specification
*  local variables

Calling a procedure of package
In order to access a public object of a package use the following syntax:


package_name is the name of the package whose object you want to access.
object_name     is the name of a public object in the package.

Let us now create a package called COURSE_PKG that contains two subprograms – CHANGEFEE and GETBATCHCOURSE.

We have to first create package specification and then body a follows:

create or replace package  course_pkg  as

    procedure changefee (pccode varchar2, newfee number);
    function  getbatchcourse(pbcode varchar2) return varchar2;

The following CREATE PACKAGE BODY statement creates the body of the package.

create or replace package  body course_pkg  as
    procedure changefee (pccode varchar2, newfee number)
          update courses set fee = newfee
          where  ccode = pccode;
          if  sql%found  then
                 raise_application_error(-20010,'Invalid course code');
          end if;
    function  getbatchcourse(pbcode varchar2) return varchar2
      v_ccode courses.ccode%type;
         select  ccode into v_ccode
         from batches
         where  bcode = pbcode;

         return v_ccode;

         when no_data_found then
             raise_application_error( -20011,'Invalid batch code');

In order to call procedure CHANGEFEE of the package, use the package name followed by procedure name as follows:

Execute course_pkg.changefee(‘ora’,5000);

Initializing package
It is possible to execute some code when a user refers the package for the first time. Any code that you feel is to be executed at the time of a user referring to the package for the first time can be put in initialization part of the package.

The following is the structure of initialization part.

create package body  name as
   /* definition of package body */

   /* code to be executed when package is referred for the first time */
Stored procedure and functions are sub programs stored in database.  Functions return a single value whereas procedure doesn’t return any value. Stored procedures have important advantages such as improving performance, making maintenance and security implementation easy.

Oracle allows parameters of three types – in, out, and in out.  OUT and IN OUT parameters are used to return values back to calling program. They can be passed by either value (default) or by reference using NOCOPY hint.

Procedures are executed under privileges of owner of the procedure. However, it is possible to execute procedure with the privileges of invoker using AUTHID CURRENT_USER option of CREATE PROCEDURE command.

Standard procedure RAISE_APPLICATION_ERROR is used to raise an application error with the given error number and message.

Package allows a group of related procedures and function to be identified by a single name.  It is used to avoid name conflicts between names of different procedures.

SQL Interview Questions and Answers

There is given sql interview questions and answers that has been asked in many companies. For PL/SQL interview questions, visit our next...